Change your plumbing fixtures to promote water conservation

Water conservation is a growing concern as water shortages become more frequent. This is why water recycling is such a high priority these days.

With many regions suffering from widespread drought in 2022, there are more initiatives than ever focused on environmental protection. The United States Environmental Protection Agency estimates daily household water consumption is 82 gallons.

Although water makes up 70% of the Earth’s surface, only about 1% of this water is accessible for human uses such as drinking, indoor plumbing and outdoor irrigation. It is therefore essential to think of alternatives of plumbing fixtures that save water and costs.

What characterizes an effective methodology

The pipes, fixtures, and appliances that provide clean water and waste disposal make up a plumbing system. The average American family wastes up to 180 gallons of water every weekwith almost half used in the bathroom between shower, toilet and tap.

In light of these statistics, the selection of low-flow plumbing fixtures for your toilet is more crucial than ever, which can significantly reduce your water consumption and save you a lot of money without requiring you to modify your current routine.

Although each building’s plumbing system is unique, several solutions are available to increase the efficiency of your system and reduce water and energy bills. These measures can go a long way to promoting water conservation. To help consumers identify the best plumbing fixtures to help them save water and money, the Environmental Protection Agency (EPA) introduced the WaterSense labeling program.

1. Get a new high-efficiency toilet

According to 2017 data, upgrading to new plumbing can save around 360 billion gallons per year. Older models contribute significantly to water waste by using approximately 3.5 gallons of water with each flush.

The latest and most efficient version colors can use as little as 1.3 gallons. The number of times a toilet needs to be flushed can be reduced by using gravity and air pressure in the design. This modification can facilitate the disposal of waste from the bathroom with low water consumption.

According to teamemergencyplumber.com, implementing such design adjustments can result in significant cost savings. Switching to one of these dressers can reduce a household’s monthly water cost by up to $100. Examples of possible variants:

  • dual flush toilet
  • Public urinals that don’t need water

2. Install a showerhead

The widespread use of outdated showerheads is one of the main causes of water waste. Considering that a typical showerhead can waste 2.5 gallons of water per minute, it’s easy to see why. You should therefore invest in a high-performance shower head.

In some cases, this modification can save up to 1.75 gallons of water per minute. This is because less water will be wasted thanks to the design of the shower head. By doing so, it maintains adequate water pressure. Switching to a more efficient showerhead could also help you save money.

3. Install water-saving taps.

Reducing water usage can help save money and resources in several ways. The Environmental Protection Agency found that faucets accounted for 15% of water use inside homes.

Then there’s the second study that proves that efficient faucets can reduce your water usage by 15% or more. This is why your faucet is one of the most crucial plumbing components to replace. To keep your faucet in good working order, you need to replace seals and aerators.

4. Eco-friendly washing machines and dishwashers

Want to guess how many gallons of water a standard washing machine uses per load? You can fill up to 23 gallons! Water-efficient washing machines cut that in half without sacrificing cleanliness or convenience.

Dishwashers have been shown to conserve water compared to washing dishes by hand in the sink, but did you know that water-efficient models can save up to four gallons of water every brewed?

These state-of-the-art devices can clean your clothes and dishes without using as much water, which means you’ll save money on your water bill.

5. Hot water recirculation

A significant amount of water can be wasted if your heat source is too far away. The longer it takes for hot water to travel from the water heater, heat pump or grill, the farther the outlet.

Water will be wasted waiting for the ideal temperature. Therefore, we advise you to turn on your pump which is delivering water.

Make sure that, when needed, your system delivers hot water from its source to your showers and faucets. This is so you don’t let cold water run unnecessarily down the drain while you wait.

6. Carry out preventive measures

Affordable savings can be achieved through routine plumbing maintenance. Bigger plumbing problems can be avoided with these simple repairs. You need to have your system checked.

You can have the plumber check sinks, tubs, and toilets for leaks during the inspection. By doing these tests, you can ensure that no water is wasted. Additionally, you can ask your plumber to check the drains and pipes.

Why should we try to conserve water?

As we’ve discussed throughout this article, saving water is an easy way to cut costs. However, water conservation is crucial in the fight to mitigate humanity’s damaging effects on the planet.

While water scarcity isn’t an immediate concern for you, it is in areas like California, Texas, and Atlanta. Installing water-efficient plumbing fixtures can save thousands of gallons of water a year, so don’t delay any longer.

You can reach us at any time to receive a free quote or arrange service. Even if you’re not ready to invest in new plumbing fixtures, you can still make small changes to save water, like turning off the water.

At the same time, you shave or brush your teeth, regularly inspect your pipes and faucets for leaks, take shorter showers, and wait until you have a whole load of laundry before turning on the washer.

Conclusion

Water and money can be saved by installing the proper plumbing fittings with no lifestyle changes required. In addition to the 4 gallons saved each shower with just the shower head, you can save approximately 700 gallons per year with just the faucet and up to 13,000 gallons per year with just the toilet. You can protect the environment and save money by installing low-flow plumbing fixtures, which reduce water waste.